染料敏化太阳能电池中大孔TiO2薄膜电极的制备及应用

采用溶胶-凝胶水热法制备了TiO₂纳晶薄膜电极，晶型为锐钛矿型。为了提高电极的光电性能，利用聚苯乙烯小球做造孔剂，制备了含有大孔隙的TiO₂纳晶薄膜电极，孔径约为200 nm，该电极具有较好的光漫反射性能，更重要的是球形大孔的存在，提高了凝胶电解质在TiO₂薄膜电极中的渗透和I₃^-离子的扩散性能，与不含大孔的TiO₂电极相比，电池的短路光电流提高约2 mA·cm^-2，光电转换效率提高0.6%。     

New Amphiphilic Polypyridyl Ruthenium（Ⅱ） Sensitizer and Its Application in Dye-Sensitized Solar Cells

Amphiphilic polypyridyl mthenium（Ⅱ） complex cis-di（isothiocyanato）（4,4＇-di-tert-butyl-2,2＇-bipyridyl）（4,4＇- dicarboxy-2,2＇-bipyridyl）ruthenium（Ⅱ）（K005） has been synthesized and characterized by cyclic voltammetry, ^1H NMR, UV-Vis, and FT-IR spectroscopies. The sensitizer sensitizes TiO2 over a notably broad spectral range due to its intense metal-to-ligand charge-transfer （MLCT） bands at 537 and 418 nm. The photophysical and photochemical studies of K005 were contrasted with those of cis-Ru（dcbpy）2（NCS）2, known as the N3 dye, and the amphiphilic ruthenium（Ⅱ） dye Z907. A reversible couple at E1/2=0.725 V vs. saturated calomel electrode （SCE） with a separation of 0.08 V between the anodic and cathodic peaks, was observed due to the Ru^Ⅱ/Ⅲ couple by cyclic voltammetry. Furthermore, this amphiphilic ruthenium complex was successfully used as sensitizers for dye-sensitized solar cells with the efficiency of 3.72% at the 100 mW·cm^-2 irradiance of air mass 1.5 simulated sunlight without optimization of TiO2 films and the electrolyte.     

钙钛矿材料组分调控策略及其光电器件性能研究进展

近年来，钙钛矿太阳电池的光电转换效率取得了爆发式增长，这与电池中钙钛矿薄膜的制备工艺和材料组分密切相关.关于钙钛矿薄膜的制备方法，相关的研究报道及综述较多，然而钙钛矿材料组分调控方面的研究梳理工作相对缺乏.本综述总结了近年来不同组分体系钙钛矿材料的研究进展，包括有机无机铅卤钙钛矿、全无机铅卤钙钛矿、少铅钙钛矿以及无铅钙钛矿.重点介绍了不同体系中具有代表性的材料组分及其对器件性能的影响，旨在梳理通过组分调控提高钙钛矿电池的效率及稳定性的研究思路，最终实现商业化应用.     

Effects of various donor: acceptor blend ratios on photophysical properties in non-fullerene organic bulk heterojunctions

In this work, the donor:acceptor ratio effected photophysical properties of non-fullerene organic solar cells are comparatively investigated. Effective transportation of the photo-generated charge carriers can be obtained with the PDBD-T:ITIC ratio variation. There is no significant energy loss variation exists in the process of changing the D:A ratio.     

Ionic Liquid Based Electrolyte with Mesoporous Silica SBA-15 as Framework for Quasi-solid-state Dye-sensitized Solar Cells

Quasi-solid-state electrolytes were fabricated with mesoporous silica SBA-15 as a framework material. Ionic conductivity measurements revealed that SBA-15 can enhance the conductivity of the quasi-solid-state electrolyte. The diffusion coefficients of polyiodide ions such as Ⅰ3ˉ and Ⅰ5ˉ which were confirmed by Raman spectroscopic measurement, were about twice larger than that of I-. The optimized photoenergy conversion efficiency of dye-sensitized solar cells （DSSC） with the quasi-solid-state electrolyte was 4.3% under AM 1.5 irradiation at 75 mW·cm^-2 light intensity.     

Solar energy conversion from water photolysis by biological and chemical systems

The production of chemicals and fuels, or energy-rich compounds, from water by sunlight is described as a particularly attractive means for the conversion of solar energy to a valuable renewable resource. The redox properties of photoexcited molecules and the operating mechanism of light-driven systems are first considered. The mechanism of water oxidation carried out by higher plants and green algae-which is actually one of the most important biochemical reactions—as well as that of artificial photosystems, up-to-now designed trying to simulate the natural process with higher efficiency and simplicity, are likewise discussed. A number of biological and chemical light-driven systems are presented as practical ways to solar energy conversion.     

Effect of Arylmethylene Substitutions on Molecular Structure,Optoelectronic Properties and Photovoltaic Performance of Dithienocyclopentafluorene-Based Small-Molecule Acceptors

Two dithienocyclopentafluorene-based small-molecule acceptors (SMAs) were developed that feature methylene-functionalized conjugated side chains, to study the effect of arylmethylene substitution and its number on structure, optoelectronic properties and device performance. Results showed that two SMAs have better absorption properties and planarity, lower bandgaps and higher LUMOs compared with the control SMA without conjugated side chains. The synthesized SMAs were tested in polymer solar cells for examples of their applicability. This work argues that the introduction of methylene-functionalized conjugated side chains has great potential in tuning molecular structure, optoelectronic properties, device physics and photovoltaic performance of SMAs.     

Photovoltaic polymers based on difluoroqinoxaline units with deep HOMO levels

We report the synthesis of low bandgap polymers with a difluoroquinoxaline unit by Stille polymerization for use in polymer solar cells (PSCs). A new series of copolymers with 2,3‐didodecyl‐6,7‐difluoro quinoxaline as the electron‐deficient unit and alkyloxybenzo[1,2‐b:4,5‐b′]dithiophene and thiophene as the electron‐rich unit were synthesized. The photovoltaic properties of the devices based on the synthesized polymers revealed that the fluorine atoms at the quinoxaline units aid in decreasing the highest occupied molecular orbital (HOMO) energy levels; this in turn increased the open circuit voltage of the devices. The polymers with long alkyl chains exhibited good solubility that increased their molecular weight, but the power conversion efficiency was low. Efficient polymer solar cells were fabricated by blending the synthesized copolymers with PC₇₁BM, and the PCE increased up to 5.11% under 100 mW cm⁻² AM 1.5 illumination. These results demonstrate that the importance of having a control polymer to be synthesized and characterized side by side with the fluorine analogues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1489–1497     

Color Bricks: Building Highly Organized and Strongly Absorbing Multicomponent Arrays of Terpyridyl Perylenes on Metal Oxide Surfaces

Terpyridine‐substituted perylenes containing cyclic anhydrides in the peri position were synthesized. The anhydride group served as an anchor for assembly of the terpyridyl‐crowned chromophores as monomolecular layers on metal oxide surfaces. Further coordination with Zn²⁺ ions allowed for layer‐by‐layer formation of supramolecular assemblies of perylene imides on the solid substrates. With properly selected anchor and linker molecules it was possible to build high quality structures of greater than ten successive layers by a simple and straightforward procedure. The prepared films were stable and had a broad spectral coverage and high absorbance. To demonstrate their potential use, the synthesized dyes were employed in solid‐state dye‐sensitized solar cells, and electron injection from the perylene antennas to titanium dioxide was observed.     

New benzodithiophene-pyrrolopyrroledione-thienopyrazine random terpolymers for organic photovoltaics

New random ternary copolymers containing fragments of pyrrolo[3,4-c]pyrrole-1,4-dione, 2,3-bis[6-fluoro-9-(2-octyl- dodecyl)-9H-carbazol-3-yl]-3,3′-[5,7-di(thiophen-2-yl)- thieno[3,4-b]pyrazine as electron-withdrawing fragments and benzodithiophene as an electron-donor block have been synthesized. The best power conversion efficiency of 9.18% was achieved for the terpolymer with pyrrolopyrroledione/ thienopyrazine ratio of 1:3. The introduction of the third thieno[3,4-b]pyrazine acceptor block into the structure of the ‘parent’ binary polymer can significantly adjust energy levels and the light absorption range of irregular copolymers, and can enhance photovoltaic properties due to improved absorption capacity and charge transfer.